FAQs
Q1: WHAT KIND OF MANUAL PROJECTION SCREEN IS BEST FOR A UST (ULTRA SHORT THROW) PROJECTOR. WHAT ABOUT MATTE WHITE VS. ALR/CLR® MATERIALS?
There are many good screen options for projectors but an ultra-short-throw (UST) projector requires a more specialized approach. In this case, the customer is interested in the difference between matte white and “ALR” options for a UST projector. Since the request is for a manual roll-up design, the material must be properly tensioned or it will not give a good picture. The screen must be perfectly flat. If not, the UST projection will be badly distorted.
Ambient Light Rejecting (ALR) materials are trending strong with projection screens because the big screen is coming out of the back room and into the living room. Now, you can replace a large flat panel TV with a larger-than-life video display. The only drawback is that TV rooms and living rooms have normal levels of interior lighting. ALR materials negate the washout effects of incident room lighting (every light source but the projector itself)
Ambient Light Rejecting (ALR) materials are trending strong with projection screens because the big screen is coming out of the back room and into the living room. Now, you can replace a large flat panel TV with a larger-than-life video display. The only drawback is that TV rooms and living rooms have normal levels of interior lighting. ALR materials negate the washout effects of incident room lighting (every light source but the projector itself)
Q2: HOW CAN I CHANGE THE PROJECTOR’S ORIENTATION TO SUIT MY TYPE OF INSTALLATION SUCH AS REAR PROJECTION?
|
A:
In the ADVANCE menu, navigate to the Orientation submenu. Select it by pressing the OK button and toggle through the various options available as follows.
|
|
Q3 : IS MOSICGO® SERIES PROJECTORS COMPATIBLE WITH AMAZON FIRE TV TO CONTROL MOSICGO’S VOLUME WITH FIRE TV REMOTE?
Unfortunately, MosicGO® is not compatible with Amazon Fire TV to control the MosicGO’s volume.
Q4 : IS MOSICGO® SERIES PROJECTORS COMPATIBLE WITH APPLE TV TO CONTROL MOSICGO’S VOLUME WITH APPLE TV REMOTE?
A: Yes, you can program our basic volume function into Apple TV remote, following is the steps:
- Got the Apple TV setting and select “Remote and Devices”
- In Home Theater Control section, select “Volume Control”
- Select “Learn New Device” on next screen
- Long pressed the MosicGO® remote volume up on +
- Long pressed the MosicGO® remote volume down when shown – on screen
- Long Pressed PJ button for “Mute”
Q5: Do you ship to outside of US and Canada ?
A: Yes, if your country zone does not have EliteProjector stock support, customer is welcome to order from US Shop.eliteprojector.com. Require customer cover freight & duty . Warranty is covered also, but customer require cover both way freight/duty to ESA for repairing, parts and labor free.
Q6: Does the projector support 3D?
A: The MosicGo Projector does not have/support 3D.
Screen Material FAQ's
Q1: WHAT IS CLR ?
Ceiling Light Rejecting® or CLR® is an ambient light rejecting material that excels at rejecting the washout effects of overhead lighting. In most commercial and residential applications, there are in ceiling light sources. A CLR® material will help negate that.
In the case of this selection, the customer was made aware of CLR® options for manual roll-up screens, but since this is a UST projector, the focus will be on a reference-grade matte white material that will work perfectly with UST projectors.
(Customer Inquiry)
Do you make a manual screen that is 110-120", and a high-quality ambient light rejecting material like your CineGrey 3D/5D? I don't see this on your site but maybe I am not seeing it or misunderstanding the need for ALR. I have an Optoma P1 being delivered and would like a screen I could use in our basement to mount to ceiling or wall, and also move outside without too much trouble, for movie/game nights with neighbors in the summer and fall. Given the UST projection and occasional outdoor use with higher ambient light potential, I would prefer to maximize performance with a material that works well for that purpose. I do not need motorized or want to worry about power source or pay extra for a feature that means nothing to us.
Hoping you offer something that can tick all these boxes.
(EliteProjector Answer)
Thank you for your inquiry. We have a premium grade (non-electric) “roll-up” projection screen known as the Manual Tab-Tension 2. This is a well-made product that is tab-tensioned for added flatness and that is ideal for your UST projector. The design also features a slow-retract mechanism (SRM) that allows the screen to retract unassisted once the toggle is released.
Although there is an interest in an ALR/CLR® material with this product, I strongly recommend that you consider the CineWhite® UHD-B is a 1.3 matte white 1.3 gain material. This product is ISF certified for superior picture performance and its tab-Tensioned flatness ensures compatibility with standard “long-throw”, short-throw, and ultra-short-throw (UST) projectors. This is primarily the best value for your UST projector if you want high quality at the best price.
As an added value, we are adapting this line to accept our CineGrey 3D® and CineGrey 5D® (ALR/CLR®) materials. While these ceiling light rejecting materials are ideal for long-throw projectors, we do have other product lines that feature a CLR® material specifically for UST projectors.
For the Manual Tab-Tension 2, there are models in 4:3, 16:10, and 16:9 aspect ratios with sizes ranging from 100” to 140” inches diagonal. I have included links to inform you about those products:
In the case of this selection, the customer was made aware of CLR® options for manual roll-up screens, but since this is a UST projector, the focus will be on a reference-grade matte white material that will work perfectly with UST projectors.
(Customer Inquiry)
Do you make a manual screen that is 110-120", and a high-quality ambient light rejecting material like your CineGrey 3D/5D? I don't see this on your site but maybe I am not seeing it or misunderstanding the need for ALR. I have an Optoma P1 being delivered and would like a screen I could use in our basement to mount to ceiling or wall, and also move outside without too much trouble, for movie/game nights with neighbors in the summer and fall. Given the UST projection and occasional outdoor use with higher ambient light potential, I would prefer to maximize performance with a material that works well for that purpose. I do not need motorized or want to worry about power source or pay extra for a feature that means nothing to us.
Hoping you offer something that can tick all these boxes.
(EliteProjector Answer)
Thank you for your inquiry. We have a premium grade (non-electric) “roll-up” projection screen known as the Manual Tab-Tension 2. This is a well-made product that is tab-tensioned for added flatness and that is ideal for your UST projector. The design also features a slow-retract mechanism (SRM) that allows the screen to retract unassisted once the toggle is released.
Although there is an interest in an ALR/CLR® material with this product, I strongly recommend that you consider the CineWhite® UHD-B is a 1.3 matte white 1.3 gain material. This product is ISF certified for superior picture performance and its tab-Tensioned flatness ensures compatibility with standard “long-throw”, short-throw, and ultra-short-throw (UST) projectors. This is primarily the best value for your UST projector if you want high quality at the best price.
As an added value, we are adapting this line to accept our CineGrey 3D® and CineGrey 5D® (ALR/CLR®) materials. While these ceiling light rejecting materials are ideal for long-throw projectors, we do have other product lines that feature a CLR® material specifically for UST projectors.
For the Manual Tab-Tension 2, there are models in 4:3, 16:10, and 16:9 aspect ratios with sizes ranging from 100” to 140” inches diagonal. I have included links to inform you about those products:
- Where to Buy the Manual Tab-Tension 2 - Amazon
- Manual Tab-Tension 2 - Product Page
|
Educational Video on UST Projector Compatibility
|
Comparison video of Matte White Vs. CineGrey 3D®
|
*The discussion below is based on actual chat transcripts with the omission of any personal/confidential material to protect the customer’s privacy. An example in this case is to change the contact’s identification name/number to “Customer” or a generic name.
Q2. I HAVE A ULTRA-SHORT THROW PROJECTOR WITH YOUR CLR/CLR 2/CLR 3 FIXED FRAME SCREEN AND I SEE THAT THE PROJECTOR DOESN'T FILL THE SCREEN COMPLETELY WITH THE SCREEN TOTALLY FLAT. ONE SIDE EDGE APPEARS TO NOT FILL CORRECTLY. I ALSO REALLY HATE THE HALO OF REFLECTED LIGHT THAT SURROUNDS THE SCREEN
In our experience it has to do also with the flatness of the wall. Not all walls are completely flat and the uneven side can cause the screen to pop out/stick out on the corner and not allow the projector to properly fill out the edges. Projector manufacturers usually have small legs at the bottom that allow the projector to adjust the projection image to offset this.
The halo effect is possibly normal but some projector manufacturers have a masking option in their menu to eliminate light bleed outside the area.
The halo effect is possibly normal but some projector manufacturers have a masking option in their menu to eliminate light bleed outside the area.
Q3 : I want to purchase an ultra-short throw projector. Your website says that CineGrey 3D®/CineGrey 5D® are not compatible with ultra-short throw projectors but it does not say what it will look like. Can you explain what this combination will look like and why it will not work? How noticeable is the difference in quality?
The CineGrey 3D®/CineGrey 5D® are angular reflective front projection materials that reflect at the mirror-opposite angle. If an ultra-short throw projector is used, the material will reflect the steep narrow light and reflect it upwards instead of to the viewer’s eye level. As you can see from the picture, the image looks foggy and unwatchable due to the projector’s light being reflected in the wrong direction. The material is reflecting and absorbing and treating it as ambient light.
This image shows how a UST projector with CineGrey 3D looks like in a room with ambient light.
|
Image shows how a UST projector with CineGrey 3D® looks like in a room with lights turned off. The image appears to look good, but is still reflecting the projector light upwards and causing a hotspot in the middle of the image.
|
Image above shows how good a performance can be obtained using a standard throw projector with ceiling lights above: Overhead lights are being absorbed/reflected off the material while providing great color saturation, image brightness, and black levels for a contrast rich presentation.
Model# AR100DHD3 – CineGrey 3D® EDGE FREE 100” Diagonal 16:9 Fixed Frame with JVC LX-NZ3B 4K HDR Laser Projector |
Accessories FAQ’s
Q1:My projector does not have a 12V trigger port, but it does have a USB Port. Is there a way to sync my Elite Screens Motorize screen to projector's power cycle and enable drop/rise operation?
A: Yes there is. You will need to splice your USB cable with an RJ45 cable. A USB has 4 wires, but you will only need the red and black. Splice them to the RJ45 orange and green wires and connect the USB. See diagram below for reference.
NOTE: If you are using your own RJ45, please use Pin 7 and 8 (Brown Pair Wire). Click here for Color Codes
NOTE: If you are using your own RJ45, please use Pin 7 and 8 (Brown Pair Wire). Click here for Color Codes
